Skip Navigation Main Navigation Side Navigation Contact Information

[Honda, Engine oil]

8th Gen Civic 1.8L Engine oil change

(2006, 2007 2008, 2009, 2010, 2011)
Edit Date: Aug. 14, 2021, 3:08 p.m.

Torque for 17mm engine oil drain plug is 39Nm. Purchase 5W-20 or 5W-30 oil or your favorite engine oil. Aluminum crush washer size is M14 with 2mm in thickness.

Do not over tighten the drain plug. It could cross thread the plug.
8th Gen Civic 1.8L  Engine oil change, None|bekomcar.com

Honda manual requires you to replace the engine oil filter and air filter in every 20,000 km. Use your common sense, inspect the air filter and replace them appropriately. Also, try to use genuine Honda engine oil filter. This process is for engine oil only and does not replace engine oil filter or the air filter.

For 8th generation Civic 1.8L, required engine oil volume is 4L.

(1) Simple engine oil replacement steps

Drain the existing engine oil-
Measure the drained engine oil-
Prepare the same volume of engine oil-
Put new engine oil using the funnel-
Double check the engine oil level-

Related contents

Need to login to leave the comments
Feb. 18, 2022, 3:07 p.m. - SunJoo Moon moderator  
오일교환 주기는 차량별 엔진상태 및 운행환경드을 생각하여 조정하는것도 좋겠다.
|
List

Top contents

There are no contents yet

QR Code

bekomcar is your life long used car partner

Used car pre-purchase inspection, car repair, car resell and export car services.

bekomcar.com

bekomcar provides reliable used car pre-purchase inspection, oil change, and resell services.


Services

  1. Pre-purchase inspection of used cars
  2. bekomcar Health Checkup
  3. bekomcar academy
  4. Other car related services

bekomcar friends

  1. Honda Club. The leading Honda club representing all Honda cars.

Repair Q&A

  1. 2020년 쉐보레 트래버스 고장코드가 EBCM (전자 브레이크 컨트롤 모듈) 'C0800-03 컨트롤모듈 전원회로 - 전압낮음' 에러코드가 스캔됩니다.
  2. BMW 528i xDrive 2012년 실화, 다수의 실린더: 감지됨 및 3번 실린더 실화 그리고 다수의 실린더: 분사 OFF 됨 등 고장코드가 있어요. 이미 헤드리빌드, 터보차져교환, 점화코일 점화플러그 교환했어요.
  3. 배터리 상태를 파악하는 가장 확실한 방법이 무엇이 있을까요? 배터리 교체를 해야 한다고 하는데 교환시점이 되었는지 궁금합니다.
  4. 현대자동차 스팅어 3.3 P007800 배기밸브 제어 솔레노이드 회로 이상(뱅크1) 고장코드 스캔됩니다.블로우밸브 맵센서 솔레노이드 교환했는데 여전합니다.
  5. BMW 2015년 640i N55엔진 점화코일 교환하고 점화플러그 랑 인젝터 다 교환했는데 아주 간헐적 실화랑 부조가 발생합니다.
  6. 쉐보레 임팔라 3.6 16년식입니다. 중고차로 구매하였고 몇가지 문제점을 느껴 질문드립니다. 데이터값은 토크프로 어플로 자주 확인하는데 Evap 값이 항상 - 값으로 나옵니다. - 로 표츌된다는건 퍼지밸브가 열린상태로 고착되었다고 판단할수 있을까요?어쩌다가 한번씩 + 값이 되는걸 볼수 있는데 거의 드뭅니다. 그리고 시트 툭툭 치는 증상이 느껴져 점화코일, 점화플러그, 엔진마운트 4종, 엔진오일 교체 하고 증상 많이 개선되었으나 강도의 차이만 있을뿐 여전히 느껴집니다. 이 증상 때문에 데이터값을 유심히 보다보니 뱅크1 뱅크2 양쪽 연료분사 시간이 차이가 나며 장기연료 보정 값도 뱅크1 뱅크2 차이가 나는걸 확인하였습니다. 연료분사시간 - 뱅크1 0.8 / 뱅크2 0.9 장기연료보정 - 뱅크1 -6 ~ -10 / 뱅크2 ± 2내외 퍼지밸브 값이 정상인지 아닌지 이로 인해서 연료분사 시간과 장기연료보정 값이 영향을 받고 있는 것인지 궁금합니다. 시트 툭툭 치는 증상도 이로 인해 발생할수 있는지도 궁금합니다.
  7. 혼다 어코드 10세대 머플러에 물 이 차서 철렁거리는데 어떻게 빼낼까요?

Copyright © 2025 bekomcar.com
Terms & conditions/ Privacy/ Accessibility/ Credits/ Cookies policy
#61, Rocketeer, LafestB, 60-30 Jungang-ro 1275beon-gil, Janghang-dong, Ilsandong-gu, Goyang-si, Gyeonggi-do, KOREA