Skip Navigation Main Navigation Side Navigation Contact Information

[Common, Safety first]

Safety first & prevent vehicle damage

Edit Date: Feb. 18, 2022, 2:46 p.m.

Your safety is the top priority. Also, any repair work should not damage the vehicle. Before any work, ensure that you first refer to the vehicle's service manual, in particular safety sections.

Electric shock accident, ECU burning, battery sensor and various electric devices burning.
Safety first & prevent vehicle damage, None|bekomcar.com

Your safety first

  1. Be sure to remove any metal accessories including metal rings, necklaces, and bracelets. When working with batteries, metals could cause strong electric sparks. That could put you in high risks.
  2. Avoid wearing clothes with loose straps. If it gets caught in various rotating objects such as alternator, catastrophic accidents could occur. If you have long hair, tie long hair to avoid being pulled into the various rotating belts and objects.
  3. Use protective gloves, a mask, and safety glasses depending on the job. Using metal brush to remove rust on the brake rotor, for example, could be very harmful to your lungs. When working with various oils, use gloves to protect the skin. Wear masks when working with batteries as well.
  4. When using a jack to lift the vehicle front,  switch the gear to parking. Put wheel choks on both sides of the wheel. In particular, when using the jack and jack stands, you must follow the safety guidelines provided by the supplier.
  5. For jack and jack stand points, refer to the manual for each vehicle's pinch weld spots. A typical passenger sedan weighs between 1.3 and 2 metric tons. Therefore, a 6 metric ton jack (about 13,228 lbs) stand is recommended. Again, do refer to the manual.

Vehicle damage

  1. Disconnect the battery terminals during various electrical work including alternator. When disconnecting the battery, disconnect the negative terminal first and then the positive terminal. When connecting, connect the positive post first and then the minus post.
  2. When jumping the vehicle due to battery discharge, ensure that minus connector is NOT hooked into the battery minus post to avoid potential spark and battery sensor burning. The strut mount bolt, engine block and ground bolt are the good choices.

For other details

  1. Always, you should refer to the safety information in the vehicle manual.
  2. Since each vehicle may be different, you should always refer to your vehicle manual. In particular, follow the safety rules when working with electrical devices and suspensions are very important.

Related contents

Need to login to leave the comments
Feb. 18, 2022, 2:44 p.m. - SunJoo Moon moderator  
자가정비는 꼭 기본적인 교육을 받기를 권장한다. 잘못하면 사람도 다치고 차량도 데미지 입는다.
|
List

Top contents

There are no contents yet

QR Code

bekomcar is your life long used car partner

Used car pre-purchase inspection, car repair, car resell and export car services.

bekomcar.com

bekomcar provides reliable used car pre-purchase inspection, oil change, and resell services.


Services

  1. Pre-purchase inspection of used cars
  2. bekomcar Health Checkup
  3. bekomcar academy
  4. Other car related services

bekomcar friends

  1. Honda Club. The leading Honda club representing all Honda cars.


Copyright © 2024 bekomcar.com
Terms & conditions/ Privacy/ Accessibility/ Credits/ Cookies policy
#61, Rocketeer, LafestB, 60-30 Jungang-ro 1275beon-gil, Janghang-dong, Ilsandong-gu, Goyang-si, Gyeonggi-do, KOREA